How To Enter Bios Windows 8 From Boot

How To: Enter the system BIOS or UEFI on Windows 8

Access to the system BIOS will depend on Windows 8 installed on your computer.

If you upgraded to Windows viii.1 or Windows viii from Windows 7, and so you will follow the instructions under UPGRADE.
If your computer came from the mill with Windows 8.1 or Windows viii installed, then follow the instructions nether PREINSTALLED.

Note: On Windows 8.1 and Windows 8 operating systems that came preinstalled on the laptop from the factory, the BIOS has been replaced by UEFI (Unified Extensible Firmware Interface).

PREINSTALLED

IMPORTANT:The post-obit procedures ONLY apply to Windows 8.1 and Windows 8 operating systems that came preinstalled on the laptop from the factory when purchased new. These process Do NOT apply to Windows 8.1 or Windows 8 operating systems that were upgraded from Windows 7 or earlier.

To access the UEFI, perform the following:

Important: At that place are many possible ways to enter the Advanced Startup Options, for boosted ways to enter, refer to the How To: Safe Mode and other Advanced Startup Options in Windows 8 article. Use that article if this method fails.

Hold the Windows central and printing the 'w' to open a search pane.
Blazon "UEFI" in the search box.
Select "Advanced Startup Options" or "Alter advanced startup options."
Under the "General" menu item, curl to the bottom.
Nether "Advanced Startup" click "Restart Now" button.
When the "Choose an Option" screen appears, select "Troubleshoot".
In the Troubleshoot menu select "Advanced Options".
In the Avant-garde Options menu select "UEFI Firmware Settings".
Click the "Restart" button to boot into the "Setup Utility" (UEFI) screen.
When the laptop restarts, the UEFI screen will be displayed.

UPGRADE

IMPORTANT: The following procedures Simply apply to Windows 8 operating systems that were upgraded from Windows 7 or earlier. These process Do NOT apply to manufactory Windows 8 operating systems installed on the laptop from the mill when purchased new.

To enter the BIOS from a Windows eight upgrade, you must offset shut down the laptop completely (non suspended, or in standby mode, or in hibernation mode). If an external keyboard is attached to the laptop (either directly or via a docking station or a port-replicator), disconnect information technology until you take completed this process.

To shut the Windows 8 laptop down completely, How to Shut Down a Laptop with Windows viii.

Utilise one of the following methods to acess the BIOS.

F2 key method

Plough the calculator on.
If you lot see an invitation to printing the F2 cardinal to enter Setup, do so.
The Setup (BIOS) screen volition appear.
If this method does non work, repeat it, but concord F2.

F12 key method

Turn the figurer on.
If you come across an invitation to press the F12 key, do then.
Boot options will appear forth with the power to enter Setup.
Using the arrow central, gyre downward and select <Enter Setup>.
Printing Enter.
The Setup (BIOS) screen will appear.
If this method does not work, repeat information technology, just hold F12.

Toshiba Hardware utility method

The Toshiba Hardware utility (HWSetup) can also exist used to alter some of the settings if F2 or F12 does not work. This method may only work on some laptops.