How To Fix The Parameter Is Incorrect Windows 7

The consequence: the parameter is incorrect on external hard drive

The parameter is incorrect is a oft occurred problem associated with external hard drive, USB flash drive and SD bill of fare. When you effort to open the disk, a "Location is not available" pop-upwards window appears and says that "Bulldoze is not accessible. The parameter is incorrect." just as the picture is shown below.

The drive becomes inaccessible so does the data inside. But don't worry, at that place are several methods tin help fix the external difficult drive is not attainable error. Now, before fixing the issue, let's take a brief wait at the causes that might be responsible for the error which tin can assist us solve the problem with ease.

Possible reasons for the parameter is incorrect on external hard drive

"Bulldoze is not accessible. The parameter is incorrect." mistake tin occur under various situations. The following are the main reasons.

• Removing the hard drive without ejecting. Force removal of external hard drive can do harm to or even destroy boot records of partition which can pb to the parameter is incorrect error. Call up to squirt external hard bulldoze using the Prophylactic Remove hardware option each time.

• USB port problem. USB is the bridge between the computer and external hard drive and in one case it gets problems, the external hard drive might be damaged.

• Bad sectors on the external hard bulldoze. Even ane bad sector can make the drive inaccessible.

• File system goes wrong. The file system is responsible for managing the data on the partition. Once it is corrupted, you may neglect to open the drive.

• Virus infection. The virus infection can also atomic number 82 to external hard bulldoze is not accessible problem.

Solutions to the parameter is incorrect on external hard drive

Here we will talk about the solutions to the parameter is incorrect on external difficult drive in Windows xi/10/8/7.

Solution one. Run CHKDSK.

CHKDSK is the Windows built-in difficult drive fault checking and repair utility. It tin assist set difficult drive problems related to bad sectors, lost clusters, file system errors, etc. So yous can run CHKDSK to have a endeavor to ready "Drive is not accessible. The parameter is incorrect." error.

Step 1. Plug in your external hard bulldoze.

Step 2. Click Showtime > Type "command prompt" in the search box > right click Command Prompt and choose Run equally administrator.

Step 3. Input chkdsk F: /f /r (F is the bulldoze letter of the inaccessible external hard drive) at the prompt and printing Enter.

When the checking process is done, restart your figurer and reconnect the external hard. Go to have a check whether the external hard bulldoze is not accessible issue has been solved. If not, please move on to become other methods.

Note: If CHKDSK finds bad sectors, information technology volition attempt to repair them. The data stored on the bulldoze with bad sectors will be lost. To avoid data loss, you can fill-in external hard drive in advance.

Solution 2.Run SFC browse

When File arrangement goes incorrect, the parameter is incorrect error may happen on external hard drive. Organization File Checker (SFC) can browse your system and assistance repair missing and corrupted organization files.

Pace 1. Type "cmd" in the search bar > correct-click Command Prompt and select Run as administrator.

Step 2. Type sfc /scannow in the CMD window and hitting Enter to showtime. If it finds any effect with the arrangement files, it will ask for Windows installation media to repair the system.

Solution 3. Check the virus

Since the virus infection can lead to "The parameter is wrong" fault, yous can run antivirus software to browse your external hard drive.

Solution iv. Format the external hard drive

If all the above methods cannot help you fix the "Drive is not accessible. The parameter is incorrect." error, formatting the external hard drive is the last solution. The formatting will erase all the information from your external difficult drive.

But don't be panic. Even if you format the drive, you still tin can restore your data with recovery software as long every bit y'all do not add new items to it. And y'all can also make a backup for your drive before the format.

AOMEI Backupper Standard, a free PC backup software tin assistance you backup the external hard as long as the inaccessible external hard drive tin can be detected by Disk Management. Y'all tin choose to image the hard bulldoze or clone the drive.

Side by side, we will show you lot how to backup the external hard with AOMEI Backupper. If you lot want to make a copy, please refer to this clone external hard drive guide to get the info.

Step 1. Plug in your external hard drive. Download, install and launch AOMEI Backupper Standard. Click Backup and choose Deejay Backup.

Step 2. Click Add Disk to choose external hard drive.

Step iii. Choose the destination path to salve the backup image.

Pace 4. Confirm the operation and click Showtime Backup to make it.

When the fill-in process is washed, click Terminate to exit. And then follow the steps below to format the external difficult drive.

Pace ane. Connect your drive to calculator.

Step 2. Right-click "This PC" > choose Manage > Deejay Management.

Step three. Right-click the drive > select format > click OK.

Footstep iv. Set the volume level, file system format > choose Perform a quick format selection > click OK to confirm.

Conclusion

That'southward all for how to set the "Drive is not accessible. The parameter is incorrect." problem on external hard bulldoze. Hope one of those solutions can help you lot solve it. In case such external difficult drive error happens again, you tin can choose to make a schedule backup for the disk to ensure the information rubber.

Source: https://www.ubackup.com/articles/the-parameter-is-incorrect-external-hard-drive-0040.html

Posted by: burkesiry1989.blogspot.com

Share this post